Памылка фармату электроннай пошты
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
ANSI BALL VALVE
ANSI ball valve is widely used in petroleum, chemical and pharmaceutical systems, including production, processing and storage facilities. It can be used to cut off the flow of pressurized fluid (liquid or gas) from one location to another under full pressure.
Product introduction:
ANSI ball valve is widely used in petroleum, chemical and pharmaceutical systems, including production, processing and storage facilities. A ball or globe valve is a valve commonly used to control the flow of pressurized fluid (liquid or gas). It is used when two opposite flow directions need to be interlocked. The ball flap is guided at its peripheral edge by an outer ring (peripheral guide ring), which has an outer groove corresponding to the flange position in each half.
In piping systems, valves are required to maintain closure and control of flow. Class 600 applies to single-phase systems using oil, coolant, and air as the medium. The valve is usually used to control the pressure or flow in the pipeline or between pipelines of similar pressure class. The ball valve is flexible and can be rotated to any position in the valve body, even under pressure. The sliding sleeve closes tightly by closing any area between the valve stem and the load port, preventing leakage, and providing a limited amount of adjustment to compensate for the wear of the gasket seat. This type has a long handle without thread and has its own independent lubrication joint.
Product advantages:
Api608 is a simple, direct acting, pilot operated ball valve designed to handle fluid service applications in the oil and gas industry. The ball valve has an internally actuated lever that moves the control rod and stem through an annular system to actively open or close the ball socket on the valve body. It is usually opened by turning the control lever clockwise to extend the valve stem and seat. When the ball seat extends, close the ball seat, rotate the valve rod counterclockwise and push the rod inward at the same time.
1. the product has a variety of uses and is suitable for severe conditions such as earthquake resistance and corrosion resistance; 2. the ball valve body is made of high-strength steel to ensure that the wafer will not be eroded when used in harsh environments; 3. the sealing seats of all ball valves are made of graphite, which can withstand high temperature; 4. the anti-corrosion treatment outside the ball valve seat and valve stem is standard, providing better corrosion resistance; 5. it is made of non sparking materials and can also be used in flammable gas environment
Product design:
Api608 ball valve can be used to excavate or maintain specific flow temperature in process control system. The ball valve is designed to work with standard domestic piping systems, but it also meets the process requirements for medium temperature, pressure and viscosity. When two different pressure media are transmitted in the whole system, the valve is suitable for use.
Api608 ball valve is a model ball valve designed for API standard API610 oil field pipe specification. This API standard API610 ball valve is characterized by the use of high-performance steel, galvanized valve body and stem. The valve rod is made of titanium alloy material, and its strength is higher than that of steel. It has high impact strength, good oxidation resistance and excellent high temperature performance. It can also be used continuously at -196~302 ° C (-320~250 ° f).
APIRT Valve manufactures some of the most dependable cast steel Ball Valves in the industry. Our products are manufactured and tested in accordance with respective API, ASME, and ANSI standards. The APIRT design offers many features and options beneficial for oil, gas, and liquid applications making it one of the most preferred floating ball valves on the market.
| Design & Manufacturing Standards | |
|---|---|
| Basic Design | ANSI/ASME B16.34, conforms to API 6D |
| Face-to-Face Dimension | ANSI/ASME B16.10 |
| Flange End Dimension | ANSI/ASME B16.5 |
| Inspection & Testing | API 598 |
| Fire Safe Design | API 607/BS 6755 |
Bill of Materials
| No. | Part | WCC |
|---|---|---|
| 1 | Handle | Carbon Steel |
| 2 | SHCS | ASTM A193 - BB |
| 3 | Name Plate | 304 SS |
| 4 | Handle Stop | 304 SS |
| 5 | SHCS | ASTM A193 - BB |
| 6 | Gland Flange | ASTM A351 - CF8 |
| 7 | Gland | ASTM A351 - CF8 |
| 8 | Gland Packing | Graphite |
| 9 | Body | ASTM A216 - WCB |
| 10 | Ball | ASTM A276 - 316 |
| 11 | Anti- Static Spring | ASTM A580 - 316 |
| 12 | Thrust Washer | RTFE |
| 13 | Stem | ASTM A276 - 316 |
| 14 | Ball | ASTM A351 - CF8 |
| 15 | Seat | PTFE |
| 16 | O-Ring | VITON |
| 17 | Gasket | 316 SS + Graphite |
| 18 | Cap | ASTM A216 - WCB |
| Note: Additional materials available upon request | ||
Bill of Materials
| No. | Part | WCC |
|---|---|---|
| 1 | SHCS | 304 SS |
| 2 | Name Plate | 304 SS |
| 3 | Handle | Carbon Steel |
| 4 | Handle Stop | 304 SS |
| 5 | SHCS | 304 SS |
| 6 | Gland Flange | ASTM A351 - CF8 |
| 7 | Gland | ASTM A351 - CF8 |
| 8 | Stem Packing | Graphite |
| 9 | Body | ASTM A216 - WCB |
| 10 | Stud | GR. B7 |
| 11 | Seat | PTFE |
| 12 | Body Gasket | 316 + Graphite |
| 13 | Body End Cap | ASTM A216 - WCB |
| 14 | Heavy Hex Nut | GR. 2H |
| 15 | Ball | ASTM A351 - CF8M/316 |
| 16 | Stem | ASTM A276-316 |
| 17 | Anti- Static Spring | 316 SS |
| 18 | Ball | 316 SS |
| 19 | Thrust Washer | PTFE |
| Note: Additional materials available upon request | ||
