Памылка фармату электроннай пошты
emailCannotEmpty
emailDoesExist
pwdLetterLimtTip
inconsistentPwd
pwdLetterLimtTip
inconsistentPwd
ISO5211 MOUNTING PAD BALL VALVE
ISO5211 Mounting Pad Balls are used for surface sealing, preventing oil or gas from backing up. Very useful for installing valves, from the valve to its hardware, our ISO5211 mounting pad balls are very durable. With 1-inch n or BSP external thread you can easily install into your existing pipeline facilities, while viewing other valves requires additional expensive pipeline engineering.
Product introduction:
Iso52111 mounting pad ball valve, also known as ISO5211 mounting pad check valve, uses a ball seat component to manufacture a surface seal. When closed, the ball moves under pressure to fit the oil on its seating surface. It has a wide range of mining, metallurgical industry and chemical, smelting, water conservancy and other chemical industries. ISO5211 basic mounting pad is very useful for installing valves. From the valve to its hardware, our ISO5211 mounting pad balls are very durable. With 1-inch n or BSP external thread, it can be easily installed into your existing pipeline facilities, while viewing other valves requires additional expensive pipeline engineering.
ISO5211 mounting ball valve is a kind of solenoid valve, and its operation mode is two-way two-way control and manual operation. The sphere can rotate 180 degrees through the electromagnet or 24VDC control voltage. ISO5211 installation ball valve is developed for the discharge of medium and low pressure liquid or gas for equipment operating in small and narrow areas. The product has a purpose of regulating the flow from the supply valve to the product. Flow on the other side.
Product advantages:
ISO5211 installation ball valve is an important part of water treatment equipment. It is used to control the direction and amount of flow allowed through pipe components or joints. The ball valve is composed of a freely rotating handle and a ball assembly with multiple ports. Each port has its own small outlet. When it is opened, water will flow in one direction. Ball valves are usually used to regulate flow, allowing for incremental regulation.
ISO5211 mounting ball valve has excellent sealing performance, small flow resistance and long service life. The valve body is made of high-quality cast iron and conforms to the international standard ISO5211. The ball is made of brass. Therefore, in addition to excellent corrosion resistance and strength, the valve also has the characteristics of high fracture capacity.
ISO5211 mounting ball valve is applicable to the discharge of high viscosity materials. The ball valve has a double seal of composite rubber / resin valve seat and stainless steel retaining ring. In addition, the ball valve is manufactured with reliable technology, which makes it long service life and easy to maintain. ISO5211 mounting pad ball valve is installed on the mounting pad with only one mounting point. The valve has a special seat ring, which is matched with the O-ring on the seat surface of the valve body. The valve seat ring is fixed by a clamping ring, and the sealing ring can be replaced quickly and conveniently.
Product design:
Iso52111 installation ball valve is designed to facilitate flow and control ball valve. They are available in different configurations or ball valve sizes and are ideal for high and low pressure applications. The valve contains a combined spring, ensuring that there is no over selection and that they also have first-class design, function and convenience.
ISO5211 is a compact and cost-effective ball valve with flush surface and mounting pad, which is designed to facilitate maintenance. This UL approved component has interchangeable valve stems and seats for installation at different flow rates. Each ball valve also includes a rotary cut and locked valve handle to increase safety.
APIRT VALVE-High mounting pad ball valve Dimension
JIS mounting pad ball valve
A ball valve is a form of quarter-turn valve which uses a hollow, perforated and floating ball to control flow through it. 10K/20K ISO5211 Mounting pad ball valve A ball valve is a form of quarter-turn valve which uses a hollow, perforated and floating ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff applications, where they are often preferred to gates and globe valves. The ball valve's ease of operation, repair, and versatility lend it to extensive industrial use, supporting pressures up to 1000 bar and temperatures up to 752°F (500°C), depending on design and materials used. Sizes typically range from 0.2 to 48 inches (0.5 cm to 121 cm).
